Optimizing the Ion Conductivity and Mechanical Stability of Polymer Electrolyte Membranes Designed for Use in Lithium Ion Batteries: Combining Imidazolium-Containing Poly(ionic liquids) and Poly(propylene carbonate).

State-of-the-art Li batteries suffer from serious safety hazards caused by the reactivity of lithium and the flammable nature of liquid electrolytes. This work develops highly efficient solid-state electrolytes consisting of imidazolium-containing polyionic liquids (PILs) and lithium bis(trifluoromethane sulfonyl)imide (LiTFSI). By employing PIL/LiTFSI electrolyte membranes blended with poly(propylene carbonate) (PPC), we addressed the problem of combining ionic conductivity and mechanical properties in one material. It was found that PPC acts as a mechanically reinforcing component that does not reduce but even enhances the ionic conductivity. While pure PILs are liquids, the tricomponent PPC/PIL/LiTFSI blends are rubber-like materials with a Young's modulus in the range of 100 MPa. The high mechanical strength of the material enables fabrication of mechanically robust free-standing membranes. The tricomponent PPC/PIL/LiTFSI membranes have an ionic conductivity of 10-6 S·cm-1 at room temperature, exhibiting conductivity that is two orders of magnitude greater than bicomponent PPC/LiTFSI membranes. At 60 °C, the conductivity of PPC/PIL/LiTFSI membranes increases to 10-5 S·cm-1 and further increases to 10-3 S·cm-1 in the presence of plasticizers. Cyclic voltammetry measurements reveal good electrochemical stability of the tricomponent PIL/PPC/LiTFSI membrane that potentially ranges from 0 to 4.5 V vs. Li/Li+. The mechanically reinforced membranes developed in this work are promising electrolytes for potential applications in solid-state batteries.

Proton-Conducting Membranes from Polyphenylenes Containing Armstrong's Acid.

This study demonstrates the use of 1,5-naphthalenedisulfonic acid as a suitable building block for the efficient and economic preparation of alternating sulfonated polyphenylenes with high ion-exchange capacity (IEC) via Suzuki polycondensation. Key to large molar masses is the use of an all-meta-terphenyl comonomer instead of m-phenyl, the latter giving low molar masses and brittle materials. A protection/deprotection strategy for base-stable neopentyl sulfonates is successfully implemented to improve the solubility and molar mass of the polymers. Solution-based deprotection of polyphenylene neopentyl sulfonates at 150 °C in dimethylacetamide eliminates isopentylene quantitatively, resulting in membranes with high IEC (2.93 mequiv/g) and high proton conductivity (σ = 138 mS/cm). Water solubility of these copolymers with high IEC requires thermal cross-linking to prevent their dissolution under operating conditions. By balancing the temperature and time of the cross-linking process, water uptake can be restricted to 50 wt %, retaining an IEC of 2.33 mequiv/g and a conductivity of 85 mS/cm. Chemical stability is addressed by treatment of the membranes under Fenton's conditions and by considering barrier heights for desulfonation using density functional theory (DFT) calculations. The DFT results suggest that 1,5-disulfonated naphthalenes are at least as stable as sulfonated polyphenylenes against desulfonation.

Advancing Antiamyloidogenic Activity by Fine-Tuning Macromolecular Topology.

Amyloid ß peptide can aggregate into thin ß-sheet fibrils or plaques deposited on the extracellular matrix, which is the hallmark of Alzheimer's disease. Multifunctional macromolecular structures play an important role in inhibiting the aggregate formation of amyloidogenic materials and thus are promising candidates with antiamyloidogenic characteristics for the development of next-generation therapeutics. In this study, we evaluate how small differences in the dendritic topology of these structures influence their antiamyloidogenic activity by the comparison of "perfectly dendritic" and "pseudodendritic" macromolecules, both decorated with mannose units. Their compactness, the position of surface units, and the size of glyco-architectures influence their antiamyloidogenic activity against Aß 40, a major component of amyloid plaques. For the advanced analysis of the aggregation of the Aß peptide, we introduce asymmetric flow field flow fractionation as a suitable method for the quantification of large and delicate structures. This alternative method focuses on the quantification of complex aggregates of Aß 40 and glycodendrimer/glyco-pseudodendrimer over different time intervals of incubation, showing a good correlation to ThT assay and CD spectroscopy results. Kinetic studies of the second-generation glyco-pseudodendrimer revealed maximum inhibition of Aß 40 aggregates, verified with atomic force microscopy. The second-generation glyco-pseudodendrimer shows the best antiamyloidogenic properties confirming that macromolecular conformation in combination with optimal functional group distribution is the key to its performance. These molecular properties were validated and confirmed by molecular dynamics simulation.

High-Resolution Tracking of Multiple Distributions in Metallic Nanostructures: Advanced Analysis Was Carried Out with Novel 3D Correlation Thermal Field-Flow Fractionation.

Multifunctional metallic nanostructures are essential in the architecture of modern technology. However, their characterization remains challenging due to their hybrid nature. In this study, we present a novel photoreduction-based protocol for augmenting the inherent properties of imidazolium-containing ionic polymers (IIP)s through orthogonal functionalization with gold nanoparticles (Au NPs) to produce IIP_Au NPs, as well as novel and advanced characterization via three-dimensional correlation thermal field-flow fractionation (3DCoThFFF). Coordination chemistry is applied to anchor Au3+ onto the nitrogen atom of the imidazolium rings, for subsequent photoreduction to Au NPs using UV irradiation. Thermal field-flow fractionation (ThFFF) and the localized surface plasmon resonance (LSPR) of Au NPs are both dependent on size, shape, and composition, thus synergistically co-opted herein to develop mutual correlation for the advanced analysis of 3D spectral data. With 3DCoThFFF, multiple sizes, shapes, compositions, and their respective distributions are synchronously correlated using time-resolved LSPR, as derived from multiple two-dimensional UV-vis spectra per unit ThFFF retention time. As such, higher resolutions and sensitivities are observed relative to those of regular ThFFF and batch UV-vis. In addition, 3DCoThFFF is shown to be highly suitable for monitoring and evaluating the thermostability and dynamics of the metallic nanostructures through the sequential correlation of UV-vis spectra measured under incremental ThFFF temperature gradients. Comparable sizes are measured for IIP and IIP_Au NPs. However, distinct elution profiles and UV-vis absorbances are recorded, thereby reaffirming the versatility of ThFFF as a robust tool for validating the successful functionalization of IIP with Au to produce IIP_Au NPs.

Gaseous- and Condensed-Phase Activities of Some Reactive P- and N-Containing Fire Retardants in Polystyrenes.

Polystyrene (PS) was modified by covalently binding P-, P-N- and/or N- containing fire-retardant moieties through co- or ter-polymerization reactions of styrene with diethyl(acryloyloxymethyl)phosphonate (DEAMP), diethyl-p-vinylbenzyl phosphonate (DEpVBP), acrylic acid-2-[(diethoxyphosphoryl)methylamino]ethyl ester (ADEPMAE) and maleimide (MI). In the present study, the condensed-phase and the gaseous-phase activities of the abovementioned fire retardants within the prepared co- and ter-polymers were evaluated for the first time. Pyrolysis-Gas Chromatography/Mass Spectrometry was employed to identify the volatile products formed during the thermal decomposition of the modified polymers. Benzaldehyde, α-methylstyrene, acetophenone, triethyl phosphate and styrene (monomer, dimer and trimer) were detected in the gaseous phase following the thermal cracking of fire-retardant groups and through main chain scissions. In the case of PS modified with ADEPMAE, the evolution of pyrolysis gases was suppressed by possible inhibitory actions of triethyl phosphate in the gaseous phase. The reactive modification of PS by simultaneously incorporating P- (DEAMP or DEpVBP) and N- (MI) monomeric units, in the chains of ter-polymers, resulted in a predominantly condensed-phase mode of action owing to synergistic P and N interactions. The solid-state 31P NMR spectroscopy, Scanning Electron Microscopy/Energy Dispersive Spectroscopy, Inductively-Coupled Plasma/Optical Emission Spectroscopy and X-ray Photoelectron Spectroscopy of char residues, obtained from ter-polymers, confirmed the retention of the phosphorus species in their structures.

A comprehensive analysis in one run - in-depth conformation studies of protein-polymer chimeras by asymmetrical flow field-flow fractionation.

Polymer-based protein engineering has enabled the synthesis of a variety of protein-polymer conjugates that are widely applicable in therapeutic, diagnostic and biotechnological industries. Accurate characterizations of physical-chemical properties, in particular, molar masses, sizes, composition and their dispersities are critical parameters that determine the functionality and conformation of protein-polymer conjugates and are important for creating reproducible manufacturing processes. Most of the current characterization techniques suffer from fundamental limitations and do not provide an accurate understanding of a sample's true nature. In this paper, we demonstrate the advantage of asymmetrical flow field-flow fractionation (AF4) coupled with multiple detectors for the characterization of a library of complex, zwitterionic and neutral protein-polymer conjugates. This method allows for determination of intrinsic physical properties of protein-polymer chimeras from a single, rapid measurement.

Multivalent Protein-Loaded pH-Stable Polymersomes: First Step toward Protein Targeted Therapeutics.

Synthetic platforms for mimicking artificial organelles or for designing multivalent protein therapeutics for targeting cell surface, extracellular matrix, and tissues are in the focus of this study. Furthermore, the availability of a multi-functionalized and stimuli-responsive carrier system is required that can be used for sequential in situ and/or post loading of different proteins combined with post-functionalization steps. Until now, polymersomes exhibit excellent key characteristics to fulfill those requirements, which allow specific transport of proteins and the integration of proteins in different locations of polymeric vesicles. Herein, different approaches to fabricate multivalent protein-loaded, pH-responsive, and pH-stable polymersomes are shown, where a combination of therapeutic action and targeting can be achieved, by first choosing two model proteins such as human serum albumin and avidin. Validation of the molecular parameters of the multivalent biohybrids is performed by dynamic light scattering, cryo-TEM, fluorescence spectroscopy, and asymmetrical flow-field flow fractionation combined with light scattering techniques. To demonstrate targeting functions of protein-loaded polymersomes, avidin post-functionalized polymersomes are used for the molecular recognition of biotinylated cell surface receptors. These versatile protein-loaded polymersomes present new opportunities for designing sophisticated biomolecular nanoobjects in the field of (extracellular matrix) protein therapeutics.

Conformation and persistence length of chitosan in aqueous solutions of different ionic strengths via asymmetric flow field-flow fractionation.

Conformation of chitosan in acidic aqueous solutions is strongly influenced by ionic strength, but the conventional employed size exclusion chromatography is limited to high ionic strength. Here we show that conformation of chitosan in acetate buffer down to millimolar ionic strength can be studied via asymmetric flow field-flow fractionation (AF4), where the separation is governed by the diffusion properties of the chitosan molecules and assisted by the electrostatic repulsion of the polyelectrolyte from the channel membrane. The size of chitosan decreases with ionic strength due to increasing screening of the polyelectrolyte effect. The persistence length of chitosan in the solutions, obtained by fitting the conformation plot by the wormlike chain model, decreases linearly with the Debye screening length from 44.5 nm at a salt concentration of 1.25 mM dominated by the electrostatic contribution to 8.6 nm in 800 mM acetate buffer close to its intrinsic persistence length of 7.7 nm.

Artificial Organelles with Orthogonal-Responsive Membranes for Protocell Systems: Probing the Intrinsic and Sequential Docking and Diffusion of Cargo into Two Coexisting Avidin-Polymersomes.

The challenge of effective integration and use of artificial organelles with orthogonal-responsive membranes and their communication in eukaryotic protocells is to understand the intrinsic membrane characteristics. Here, a novel photo-crosslinked and pH-responsive polymersome (Psome B) with 2-(N,N'-diisopropylamino)ethyl units in the membrane and its respective Avidin-Psome B hybrids, are reported as good candidates for artificial organelles. Biotinylated (macro)molecules are able to dock and diffuse into Avidin-Psome B to carry out biological activity in a pH- and size-dependent manner. Combined with another polymersome (Psome A) with 2-(N,N'-diethylamino)ethyl units in the membrane, two different pH-responsive polymersomes for mimicking different organelles in one protocell system are reported. The different intrinsic docking and diffusion processes of cargo (macro)molecules through the membranes of coexisting Psome A and B are pH-dependent as confirmed using pH titration-dynamic light scattering (DLS). Psome A and B show separated "open", "closing/opening", and "closed" states at various pH ranges with different membrane permeability. The results pave the way for the construction of multicompartmentalized protocells with controlled communications between different artificial organelles.

Molecular Dynamics-Guided Design of a Functional Protein-ATRP Conjugate That Eliminates Protein-Protein Interactions.

Even the most advanced protein-polymer conjugate therapeutics do not eliminate antibody-protein and receptor-protein recognition. Next-generation bioconjugate drugs will need to replace stochastic selection with rational design to select desirable levels of protein-protein interaction while retaining function. The "Holy Grail" for rational design would be to generate functional enzymes that are fully catalytic with small molecule substrates while eliminating interaction between the protein surface and larger molecules. Using chymotrypsin, an important enzyme that is used to treat pancreatic insufficiency, we have designed a series of molecular chimeras with varied grafting densities and shapes. Guided by molecular dynamic simulations and next-generation molecular chimera characterization with asymmetric flow field-flow fractionation chromatography, we grew linear, branched, and comb-shaped architectures from the surface of the protein by atom-transfer radical polymerization. Comb-shaped polymers, grafted from the surface of chymotrypsin, completely prevented enzyme inhibition with protein inhibitors without sacrificing the ability of the enzyme to catalyze the hydrolysis of a peptide substrate. Asymmetric flow field-flow fractionation coupled with multiangle laser light scattering including dynamic light scattering showed that nanoarmor designed with comb-shaped polymers was particularly compact and spherical. The polymer structure significantly increased protein stability and reduced protein-protein interactions. Atomistic molecular dynamic simulations predicted that a dense nanoarmor with long-armed comb-shaped polymer would act as an almost perfect molecular sieve to filter large ligands from substrates. Surprisingly, a conjugate that was composed of 99% polymer was needed before the elimination of protein-protein interactions.

Matrix metalloproteinase-1 decorated polymersomes, a surface-active extracellular matrix therapeutic, potentiates collagen degradation and attenuates early liver fibrosis.

Liver fibrosis affects millions of people worldwide and is rising vastly over the past decades. With no viable therapies available, liver transplantation is the only curative treatment for advanced diseased patients. Excessive accumulation of aberrant extracellular matrix (ECM) proteins, mostly collagens, produced by activated hepatic stellate cells (HSCs), is a hallmark of liver fibrosis. Several studies have suggested an inverse correlation between collagen-I degrading matrix metalloproteinase-1 (MMP-1) serum levels and liver fibrosis progression highlighting reduced MMP-1 levels are associated with poor disease prognosis in patients with liver fibrosis. We hypothesized that delivery of MMP-1 might potentiate collagen degradation and attenuate fibrosis development. In this study, we report a novel approach for the delivery of MMP-1 using MMP-1 decorated polymersomes (MMPsomes), as a surface-active vesicle-based ECM therapeutic, for the treatment of liver fibrosis. The storage-stable and enzymatically active MMPsomes were fabricated by a post-loading of Psomes with MMP-1. MMPsomes were extensively characterized for the physicochemical properties, MMP-1 surface localization, stability, enzymatic activity, and biological effects. Dose-dependent effects of MMP-1, and effects of MMPsomes versus MMP-1, empty polymersomes (Psomes) and MMP-1 + Psomes on gene and protein expression of collagen-I, MMP-1/TIMP-1 ratio, migration and cell viability were examined in TGFß-activated human HSCs. Finally, the therapeutic effects of MMPsomes, compared to MMP-1, were evaluated in vivo in carbon-tetrachloride (CCl4)-induced early liver fibrosis mouse model. MMPsomes exhibited favorable physicochemical properties, MMP-1 surface localization and improved therapeutic efficacy in TGFß-activated human HSCs in vitro. In CCl4-induced early liver fibrosis mouse model, MMPsomes inhibited intra-hepatic collagen-I (ECM marker, indicating early liver fibrosis) and F4/80 (marker for macrophages, indicating liver inflammation) expression. In conclusion, our results demonstrate an innovative approach of MMP-1 delivery, using surface-decorated MMPsomes, for alleviating liver fibrosis.

Engineering exosome polymer hybrids by atom transfer radical polymerization.

Exosomes are emerging as ideal drug delivery vehicles due to their biological origin and ability to transfer cargo between cells. However, rapid clearance of exogenous exosomes from the circulation as well as aggregation of exosomes and shedding of surface proteins during storage limit their clinical translation. Here, we demonstrate highly controlled and reversible functionalization of exosome surfaces with well-defined polymers that modulate the exosome's physiochemical and pharmacokinetic properties. Using cholesterol-modified DNA tethers and complementary DNA block copolymers, exosome surfaces were engineered with different biocompatible polymers. Additionally, polymers were directly grafted from the exosome surface using biocompatible photo-mediated atom transfer radical polymerization (ATRP). These exosome polymer hybrids (EPHs) exhibited enhanced stability under various storage conditions and in the presence of proteolytic enzymes. Tuning of the polymer length and surface loading allowed precise control over exosome surface interactions, cellular uptake, and preserved bioactivity. EPHs show fourfold higher blood circulation time without altering tissue distribution profiles. Our results highlight the potential of precise nanoengineering of exosomes toward developing advanced drug and therapeutic delivery systems using modern ATRP methods.

Avidin Localizations in pH-Responsive Polymersomes for Probing the Docking of Biotinylated (Macro)molecules in the Membrane and Lumen.

To mimic organelles and cells and to construct next-generation therapeutics, asymmetric functionalization and location of proteins for artificial vesicles is thoroughly needed to emphasize the complex interplay of biological units and systems through spatially separated and spatiotemporal controlled actions, release, and communications. For the challenge of vesicle (= polymersome) construction, the membrane permeability and the location of the cargo are important key characteristics that determine their potential applications. Herein, an in situ and post loading process of avidin in pH-responsive and photo-cross-linked polymersomes is developed and characterized. First, loading efficiency, main location (inside, lumen, outside), and release of avidin under different conditions have been validated, including the pH-stable presence of avidin in polymersomes' membrane outside and inside. This advantageous approach allows us to selectively functionalize the outer and inner membranes as well as the lumen with several bio(macro)molecules, generally suited for the construction of asymmetrically functionalized artificial organelles. In addition, a fluorescence resonance energy transfer (FRET) effect was used to study the permeability or uptake of the polymersome membrane against a broad range of biotinylated (macro)molecules (different typology, sizes, and shapes) under different conditions.

The Role of Solubility in Thermal Field-Flow Fractionation: A Revisited Theoretical Approach for Tuning the Separation of Chain Walking Polymerized Polyethylene.

The influence of the polymer solubility on the separation efficiency in thermal field-flow fractionation (ThFFF) was investigated for a polymer model system of differently branched chain walking polyethylenes in five different solvents, which were selected depending on their physical parameters. The understanding of polymer thermal diffusion has been elucidated using a revisited approach based on the latest thermal diffusion prediction model by Mes, Kok, and Tijssen combined with the Hansen solubility theory. Thereby, a significant improvement in the precision of the thermal diffusion prediction and the separation efficiency has been achieved by implementation of the temperature dependency on Hansen solubility parameters. In addition, we demonstrate a method for validation of the segmental size of polymer chains with varying topology by using the revisited thermal diffusion prediction approach in inverse mode and experimental thermal diffusion data.

Light-Driven Proton Transfer for Cyclic and Temporal Switching of Enzymatic Nanoreactors.

Temporal activation of biological processes by visible light and subsequent return to an inactive state in the absence of light is an essential characteristic of photoreceptor cells. Inspired by these phenomena, light-responsive materials are very attractive due to the high spatiotemporal control of light irradiation, with light being able to precisely orchestrate processes repeatedly over many cycles. Herein, it is reported that light-driven proton transfer triggered by a merocyanine-based photoacid can be used to modulate the permeability of pH-responsive polymersomes through cyclic, temporally controlled protonation and deprotonation of the polymersome membrane. The membranes can undergo repeated light-driven swelling-contraction cycles without losing functional effectiveness. When applied to enzyme loaded-nanoreactors, this membrane responsiveness is used for the reversible control of enzymatic reactions. This combination of the merocyanine-based photoacid and pH-switchable nanoreactors results in rapidly responding and versatile supramolecular systems successfully used to switch enzymatic reactions ON and OFF on demand.

A smart polymer for sequence-selective binding, pulldown, and release of DNA targets.

Selective isolation of DNA is crucial for applications in biology, bionanotechnology, clinical diagnostics and forensics. We herein report a smart methanol-responsive polymer (MeRPy) that can be programmed to bind and separate single- as well as double-stranded DNA targets. Captured targets are quickly isolated and released back into solution by denaturation (sequence-agnostic) or toehold-mediated strand displacement (sequence-selective). The latter mode allows 99.8% efficient removal of unwanted sequences and 79% recovery of highly pure target sequences. We applied MeRPy for the depletion of insulin, glucagon, and transthyretin cDNA from clinical next-generation sequencing (NGS) libraries. This step improved the data quality for low-abundance transcripts in expression profiles of pancreatic tissues. Its low cost, scalability, high stability and ease of use make MeRPy suitable for diverse applications in research and clinical laboratories, including enhancement of NGS libraries, extraction of DNA from biological samples, preparative-scale DNA isolations, and sorting of DNA-labeled non-nucleic acid targets.

Non-Parabolicity correction for fifty-nine solvents and a retention study for strongly distorted flow-profiles in thermal field-flow fractionation.

The non-parabolicity correction of the laminar flow profiles was numerically calculated for fifty-nine solvents. The exact flow profiles were simulated based on sophisticated experimental literature data of dynamic viscosity and thermal conductivity and their dependency on the temperature in between cold wall temperatures of -10 °C up to 120 °C and temperature gradients up to ΔT = 120 K. Based on this computation the polynomial coefficients for the calculation of the non-parabolicity parameter ν is tabulated for each solvent. For this calculation a third-degree polynomial velocity profile was applied, which approximates in a good agreement the exact profile for moderately distorted flow profiles. Instead, for strongly distorted flow profiles a more exact solution with keeping ν as only adjustable parameter is proposed. Additionally, an empirically derived solution is presented to calculate the dimensionless retention parameter λ in fair accuracy directly from retention data.

Dehydropolymerisation of Methylamine Borane and an N-Substituted Primary Amine Borane Using a PNP Fe Catalyst.

Dehydropolymerisation of methylamine borane (H3 B⋅NMeH2 ) using the well-known iron amido complex [(PNP)Fe(H)(CO)] (PNP=N(CH2 CH2 PiPr2 )2 ) (1) gives poly(aminoborane)s by a chain-growth mechanism. In toluene, rapid dehydrogenation of H3 B⋅NMeH2 following first-order behaviour as a limiting case of a more general underlying Michaelis-Menten kinetics is observed, forming aminoborane H2 B=NMeH, which selectively couples to give high-molecular-weight poly(aminoborane)s (H2 BNMeH)n and only traces of borazine (HBNMe)3 by depolymerisation after full conversion. Based on a series of comparative experiments using structurally related Fe catalysts and dimethylamine borane (H3 B⋅NMe2 H) polymer formation is proposed to occur by nucleophilic chain growth as reported earlier computationally and experimentally. A silyl functionalised primary borane H3 B⋅N(CH2 SiMe3 )H2 was studied in homo- and co-dehydropolymerisation reactions to give the first examples for Si containing poly(aminoborane)s.

Association of Enzymatically and Nonenzymatically Functionalized Caseins Analyzed by Size-Exclusion Chromatography and Light-Scattering Techniques.

The influence of covalent protein modifications resulting from the Maillard reaction (glycation) of casein and lactose on the noncovalent association behavior of the protein was studied. Nonenzymatic cross-linking with methylglyoxal (MGO) and glutaraldehyde (GTA) as well as enzymatic cross-linking with microbial transglutaminase (mTG) was investigated in comparison. Molar mass, particle size, and conformational characteristics of nonmicellar casein associates as well as the extent of intraparticle protein cross-linking were examined utilizing size-exclusion chromatography (SEC) combined with UV detection and static and dynamic light scattering. Cross-linking resulted in the stabilization of a certain fraction of casein associates, with particle sizes of approximately 30 nm in radius of gyration (Rg), and promoted an incorporation of further casein molecules into those particles, yielding molar masses (Mw) of 1.0-1.2 × 106 g/mol. When caseins were additionally conjugated with lactose during the early Maillard reaction, a further growth of the associates up to approximately 50 nm in Rg with a Mw of 2.1 × 106 g/mol was observed. Furthermore, glycation reactions induced a transition from slightly elongated, random-coil structures toward more anisotropic conformations. Associates consisting of caseins cross-linked with GTA appeared to preserve the original particle conformation.

Bivalent Peptide- and Chelator-Containing Bioconjugates as Toolbox Components for Personalized Nanomedicine.

While personalized therapy bears an enormous potential in cancer therapy, the development of flexible, tailorable delivery systems remains challenging. Here, we present a "tool-kit" of various avidin-based bioconjugates (BCs) for the preparation of personalized delivery systems. Corresponding BCs were synthesized using the self-assembly of avidin with various biotinylated ligands, such as one cationic glycodendrimer for dendriplex adsorption and two functional ligands for imaging (glycodendrimers with DOTA or NOTA units) or targeting (biotinylated PEG decorated with ligands). Substituting antibodies for targeting small molecules were coupled to biotin-PEG compounds for addressing the folate receptor (FR), epidermal growth factor receptor (EGFR), and prostate-specific membrane antigen (PSMA). After successful characterization and proof of good storage and redispersion properties of BCs, cytotoxicity assays and first in vivo imaging studies with 99mTc-complexing bioconjugates provide evidence that these BCs and their avidin analogues can be used as tool-kit components in theranostic systems for personalized medicine.